Far-end recognizer with prompting voice.
One person enough to complete cable continuity check.
Simple and easy use. Big screen to display test result clear.
Portable unit with long battery life (wait-case 50 hours).
Automatically time-delay shut off and backlight display function.
Measure length and pair with or without far-end recognizer.
Locate cable and there are 8 far-end passive test jacks (ID No.ID1-ID 8).
Single board computer software watchdog design and reliable operation.
NF-308 LCD Display Telephone Network Ethernet LAN Phone Tester Multipurpose Cable Wire Tracker Length Scanner RJ45 11
TOP 6 Reasons to get NF-308 :
1. Locate the wiring or connection error.
2. Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables.
3. Measure cable length and determine the distance of open circuit and short circuit.
4. Dynamically calibrate cable length and make length measurement as accurate as 97%.
5. Check wiring error in 5E, 6E, telephone line, coaxial cable, USB cable such as open circuit, short circuit, jumper wire,
reverse connection or cross-talk interference.
6. Self-checking function and automatically compensate any change in capacity or ambient temperature.
1. Overall dimension
1). Main tester: 185×105×50mm; receiver: 218×46×29mm;
2). Remote identifier: 84×34×27mm.
Two laminated batteries of 9V.(Not include)
Special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2 mm).
4. Type of cable tested
STP/UTP twin twisted cable, coaxial cable, telephone line.
5. Type of cable detected
5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires.
6. Ambient temperature in work
7. Tester Port
1). Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), hunting RJ45 port(With RJ45);
2). Remote identifier RJ45 port (R)
3). The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
8. Length Measurement of Twin Twisted Cable
1). Scope: 1~350 M ( 3 ~200 ft)
2). Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft)(calibrating cable > 5 M)
3). Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft).(AMP, AT&T Class 5 cable)
4). Display: M or ft.
9. Length Calibration:
1). User can set calibration factor by himself with a given length cable.
2). The length of calibrating cable is more than 5 M.
10. Wire Sequence and Locating Cable Error:
Check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference.
11. Locating Cable
8 Remote identifier test jacks (ID 1≥ID 8).
12. Automatic Time-delay shut Off Time:
The tester does not operate for 30 minutes.
NF-308 Package Including:
1pc x Main Tester
1pc x Receiver
1pc x Earphone
4pcs x Cables
1pc x Carrying Bag
1pc x Instruction Manual
If you have any questions, please feel free to contact us by following way:
Whatsapp: 0086-18046220975Shipment Warm Tips:
We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you have asked for a change in address please add your shipping address on your paypal account,please leave a message on paypal when you check out, or send us the screen shot of new shipping address under paypal account
to sales@iDiyTool.com or whatsapp:+86 18046220975.