MS6310 Combustible Gas Leak Detector Natural Methane Gas Sound Light Alarm

In Stock. History 19 sold. Item No. AT193

Buy Now: US$44.99
Free Shipping Standard Flat Rate Shipping Service    Estimated delivery time: 10-18 working days.See details»
17.2cm*7cm*4.6cm     ( Inch: 6.77*2.76*1.81 )
Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

MS6310 Combustible Gas Leak Detector Natural Methane Gas Sound Light Alarm,Quickly identify and determine the location of combustible gas leak .
MS6310 Combustible Gas Leak Detector Natural Methane Gas Sound Light Alarm 

Top 5 Reasons to Get MS6310

1.Quickly identify and determine the location of combustible gas leak ;
2.Manually adjust the sensitivity ;
3.High sensitivity ;
4.Visible sound and light alarms ;
5.Detection Gas: (natural gas, methane, ethane, propane, butane, acetone, alcohol, ammonia, hydrogen, smoke, sulfur, naphtha, gasoline vapor, carbon monoxide, paint thinners, organic solvent vapors, easy volatile industrial solvent.)

MS6310 Specifications:

Resolution: 50 ppm (methane);
Alarm range: 10% ~ 40% LEL;
Response time: <2 seconds;
Warm-up time: ≥ 2 minutes;
Resume Zero Time: 7 to 10 minutes in pure air;
Operating Temperature: 0 ~ 50 ℃;
Operating Humidity: 10 ~ 90% RH (with no icing);
Dimensions: 172 × 70 × 46 mm;
Power: 4 x1.5V/AAA battery(Not include)
Weight: 330g
MS6310 Combustible Gas Leak Detector Natural Methane Gas Sound Light Alarm
MS6310 NOTE:

Please preheated before use in clean air;
When the green light is flashing, please replace the battery;
Please shut down when not in use to avoid running out of power.

MS6310 Usage: 
-Red: Detection Alarm Indication;
-Green: power indicator and power low-voltage alarm indication ;
-In the pure air, press the power button , the green lighting.;
-Turn the knob clockwise to the lowest sensitivity , wait at least two minutes to warm up;
-Note: preheating process will continuously flashing red, accompanied by the sound of the alarm, which is caused by the sensor does not stabilize, do not worry bout it.
-After preheating, turn the knob counterclockwise callback to a critical alarm, then the highest detection sensitivity. Red light does not shine, no warning, allowing the occasional red light, does not affect instrument performance.
-Hold the instrument with one hand, then can not adjust the knob ,let sensor slowly near the  measured gas. When the probe to a certain concentration of combustible gases, the red light flashes, accompanied by the sound of the alarm, the greater the concentration, the more intense the alarm.
-After detection is complete, the sensitivity knob clockwise to the lowest point, press the power button to shut down, the green light is off.
-With a black packet,  convenient for carrying out work.

MS6310 Package List:
1 * Flammable gas detector
1 * Storage bag
1 * User manual

If you have any questions, please feel free to contact us by following way:

Whatsapp: 0086-18046220975

Shipment Warm Tips:

We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you have asked for a change in address please add your shipping address on your paypal account,please leave a message on paypal when you check out, or send us the screen shot of new shipping address under paypal account to or whatsapp:+86 18046220975.